Parts / No-holes clip (secondary concept)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
No-holes clip (secondary concept) secondary
Thin plate clamped under the existing L-bracket screw (bracket not measured).
- File
hardware/stl/mount_noholes_clip.stl- Bounding box
- 12.00 × 44.10 × 3.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 0.63 cm³; ≈ 0.8 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 436 triangles
- Material
- PETG
- Layer
- 0.2 mm
- Walls / infill
- 3 walls, 100 %
- Orientation
- Flat.
- Supports / brim
- None.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.