Parts / Frame bracket (secondary concept)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
Frame bracket (secondary concept) secondary
Screwed plate with a flange for a motor that keeps its ears. Round 5 fixed the motor-ear pitch to 35 mm (the print plan's bug note predates that).
- File
hardware/stl/mount_bracket_frame.stl- Bounding box
- 42.20 × 60.00 × 18.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 5.63 cm³; ≈ 7.2 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 4,276 triangles
- Material
- PETG
- Layer
- 0.2 mm
- Walls / infill
- 4 walls, 40 %
- Orientation
- Plate down.
- Supports / brim
- None.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.
← Fork claw coupler (secondary concept)No-holes clip (secondary concept) →