Parts / Pane pack with cell (legacy)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
Pane pack with cell (legacy) option
Panel plus a thin LiPo pouch side by side (power_variant liion_pack). Not the recommended layout: the cell sees the cold between the panes.
- File
hardware/stl/pane_pack_with_cell.stl- Bounding box
- 134.40 × 117.80 × 4.60 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 21.93 cm³; ≈ 23.5 g if printed solid in ASA (real mass depends on walls and infill)
- Mesh
- 5,474 triangles
- Material
- ASA (or PETG)
- Layer
- 0.2 mm
- Walls / infill
- 3 walls, 100 %
- Orientation
- Back down.
- Supports / brim
- From the build plate inside the cell pocket. 5 mm brim on this wide part.
- Quantity
- -
- Versions
- C
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.
← North-option cell cover (D)Pane pack cell cover (legacy) →