Parts / TPU sleeve liner (secondary concept)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
TPU sleeve liner (secondary concept) secondary
Liner for the TPU sleeve coupler.
- File
hardware/stl/coupler_tpu_sleeve_liner_TPU.stl- Bounding box
- 6.20 × 6.50 × 16.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 0.26 cm³; ≈ 0.3 g if printed solid in TPU (real mass depends on walls and infill)
- Mesh
- 428 triangles
- Material
- TPU 95A
- Layer
- 0.16 mm
- Walls / infill
- 3 walls, 100 %
- Orientation
- Upright.
- Supports / brim
- None. 5 mm brim.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.
← TPU sleeve coupler (secondary concept)Fork claw coupler (secondary concept) →